SaniFlo - Gray Water Pumps SANISWIFT Residential Medium Duty Drain Pump

Save 10%
Coupon Code SANIFLO10
Login and Buy this product to earn 2 points
Model :

our price $304.46
msrp $358.00

You saved $53.54 (15%)

In Stock
Add to Favorites
Save 10%
Coupon Code SANIFLO10
Product Description & Details :
021 - SANISWIFT Residential Medium DutyDrain Pump White
The Saniswift is a drain pump that is suitable for use in a basement apartment or anywhere in the house where additional fixtures are most wanted. It will pump the waste water away from a variety of sources such as: a kitchen sink - laundry sink - washing machine (indirect connection) - dishwasher - bar sink - etc.
The Saniswift's modern style prevails over other bulky relics. This system offers powerful and economical pumping action in a compact - contemporary design. With unprecedented performance and features - this pump is unmatched in its class.
The inside of the Saniswift is comprised of a pressure switch and circuit board assembly - which starts and stops the unit - and the motor - which drives the pump.
When the water enters the Saniswift - it activates a pressure switch which in turn starts the motor. The motor is sealed for life in an oil filled enclosure. A spindle/shaft drives the impeller and therefore the moving parts are kept to an absolute minimum.
The unit pumps the effluent upward to 14 feet and/or 140 feet horizontally (with gravity fall). Once the water is discharged and the water level in the container goes down - the pressure switch deactivates the unit until water enters the unit again. A normal operating cycle for the Saniswift can be as short as 2 - 10 seconds depending upon the discharge pipe run configuration; power consumption is therefore minimal.
In addition to a sink - the Saniswift will also accept and discharge the waste water from a variety of other sanitary fixtures such as: a kitchen sink - a shower - a urinal. When adding a shower - a base will have to be constructed.
This base should be made out of a 2in x 6in (minimum) or 2 x 8 (recommended) on edge - to allow for the installation of a P-trap and the required 1/4 in per foot gravity flow towards the pump unit.
The waste water from other sanitary fixtures is discharged into the Saniswift via two 1- 1/2 inch inlets - on either side of the housing and an additional inlet on the top of the unit. A non-return valve - which comes already assembled on the discharge rubber connector - prevents back flow into the unit.
This unit has been designed with a vent connection on the lid. All plumbing codes require connection to a vent system. Please note that the vent system should be a two-way air vent. It is also highly recommended for the gray water pump to be connected to a Ground Fault Interrupter (GFI) circuit. The Saniswift is a compact unit with attractive rounded contours that fits neatly into tight spaces.

The Saniswift has been certified to American and Canadian Standards. Electrical standard UL 788 - CA: Electrical standard CSA C22.2

Horizontal Discharge (ft): 140
Dimensions (Height x Width x Depth): 8-3/4in x 9in x 10-1/4 in
Maximum Temperature (F): 140
Discharge Rate at Max. Height (gpm): 18
Vertical Discharge (ft): 14
Discharge Pipe Diameter (in): 1in
Min. Gravity Fall on Horizontal Run: 1/4 in per foot
Horsepower: 0.3
Motor Speed (RPM): 3600
Electrical Supply (V): 115

Possible Connections:
- Sink
- Shower
- Washing Machine
- Dishwasher

Vertical and Horizontal Discharges:
- Vertical: 14 ft
- Horizontal: 140 ft
Special Notes :
Shipping Weight: 13
UPC: 859925002213
Additional Information :
More Information
Write Your Own Review
You're reviewing:SaniFlo - Gray Water Pumps SANISWIFT Residential Medium Duty Drain Pump
Your Rating