RMV-2 Rohl - Valve Hi-Flow Pressure Balance -
- Pressure balanced concealed bath and shower mixer rough
- Single lever, diaphragm cartridge
- 1/2" x 1/2" male connections
- Integrated service stops
- Shower and handshower installation: UTILIZE TOP OUTLET FOR THE SHOWERHEAD ONLY. Bottom outlet should be for the handshower only. Outlet should be 18" min from bottom of the diverter valve installed adjacent to the center of the valve.
- Flow rate: Tub 5.3 GPM @ 50 PSI Shower 4.7 GPM @ 50 PSI
- From the center of supply to finished wall: min 1 5/8", max. 2 1/8"
- Install any tub spout 18" min. from the diverter or valve outlet
- If PEX is utlitzed, oversize the supply line to 3/4" for full flow capacity
- RMV-2 Extension kits options:
- 1/2" handle and diverter extention 1207KIT(FINISH)
- 3/4" handle and diverter extention 1208KIT(FINISH)